Communications is a full service Internet Service Provider.
Installing SkyPoint Customized
Internet Explorer From Disk
- 1.Insert Disk 1 into
your disk drive.
- 2.Select "Run" from
the "File" menu.
Click on the "File" menu in the upper left hand corner of your Program Manager.
Select "Run." A window will open.
- 3.Run the installation
the "Command Line" box, type a:\setup.exe and click the "OK" button.
- 4.Accept the license
terms. A window
containing the software license will appear. Read the terms and click the
"I Accept" button.
- 5.Click the "OK"
button in the Welcome Window.
Another window will appear telling you that the installer is searching for
previously installed Internet Explorer components on your hard drive.
- a.Click "OK"
if components are found.
- 6.Select complete
A window will appear giving you the option to install the complete or custom
version of the package. Click the "Complete" button.
- 7.Click "Continue"
in the Program Group window.
The installer will show you a window with various program groups in which
the software may be installed. The correct one has already been chosen, so
click "Continue." Another window will pop up, telling you that the installer
is checking for disk space. This may take several minutes, so please be patient.
- 8.Follow the directions
given by the software.
The installer will direct you to change disks in order to install the software.
Each time you change a disk, you will need to click the "OK" button on the
window. Follow these instructions until installation is complete and you see
an "Install New Modem" window.
- 9.Turn your modem
on. When you
see the modem installation window, make sure your modem is on and connected
correctly before continuing!
- 10.Click the "Next"
installer will begin detecting your modem. This may take several minutes.
- 11.Click the "Next"
the installer's modem information.
- 12.Click the "Finish"
will be asked if you want to restart.
- 13.Restart the computer.
Click on the
"Yes" button to restart. If your machine does not fully reboot in the next
minute or so, turn off your computer, wait 10 seconds, and then turn it back
- 14.Open the Microsoft
Internet Explorer program group.
In your Windows Program Manager, double-click on the "Microsoft Internet Explorer"
icon to open the Program group.
- 15.Double-click the
"Get on the Internet" icon.
A full-sized window will open.
- 16.Click the "Install"
button. Another window showing a list of program groups will appear.
- 17.Click the "OK"
software is already set to install the dialer in the correct program group.
A new window will open, telling you to click on the Internet Explorer icon.
- 18.Click "OK."
- 19.Double-click on
the Internet Explorer Icon.
A new window will appear asking you for your account information.
- 20.Enter the requested
In the Phone Number box, do not change any information unless your telephone
requires you to dial 9 before calling out (enter a 9,, before the telephone
number listed) or you need to turn off call waiting (enter the appropriate
string to turn off call waiting before the number listed).
- 21.Click "Connect".
You will now be able to connect to the Internet.