Communications is a full service Internet Service Provider.
Installing SkyPoint Customized
Internet Explorer From Disk
- Insert Disk 1 into
your disk drive.
- Select "Run" from
the "Start" menu.
Click on the "Start" button in the lower left hand corner of your screen.
Select "Run." A window will open.
- Run the installation
the "Open" box, type a:\setup.exe and click the "OK" button.
- Follow the directions
given by the software.
The installer will direct you to change disks in order to install the software.
Each time you change a disk you will need to click the "OK" button. Follow
these instructions until installation is complete. A license window will then
- Click "Yes" to accept
the license. A window will appear asking you if you want to install the
software other than in the preconfigured location.
- Click "No". The
preconfigured information is correct.
- Reboot your computer.
When the software asks you whether you want to reboot, click "Yes". If your
computer does not successfully reboot, turn it off, wait 10 seconds, then
turn it on again.
- Double-Click on the
Internet Explorer icon on your desktop.
You will be asked a series of questions about your account as your dialer
is set up. In the Phone Number box, do not change any information unless your
telephone requires you to dial 9 before calling out (enter a 9,, before
the telephone number listed) or you need to turn off call waiting (enter the
appropriate string to turn off call waiting before the number listed). Complete
the installation, then make your first connection to the Internet.